Results 1 to 10 of 13
Threaded View
-
01-04-2016, 09:51 PM #9
- Join Date
- Feb 2015
- Location
- Pinehurst North Carolina
- Posts
- 9
Kris,
I modeled a similar tire and made a cross section. The thin walls of my stl file are clean intersections with no walls passing through another. The slice was good with no top plate. I am convinced that the stl model you downloaded is causing the problem.
Chris
Qidi X Plus 3 Paper thin first...
Yesterday, 01:15 AM in General 3D Printing Discussion